4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
RK73B2BRTTD103J
| DigiKey Part No | 2019-RK73B2BRTTD103JTR-ND |
| Mfr Part No | RK73B2BRTTD103J |
| Manufacturer | KOA Speer Electronics, Inc. |
RES 10K OHM 5% 1/4W 1206
10 kOhms ±5% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Anti-Sulfur, Automotive AEC-Q200 Thick Film
Powered by
EW
Response By EW AI
Specification check for selected SMD replacement resistor:
✅ Resistance: 10kΩ (matches required 10kΩ)
✅ Tolerance: ±5% (matches required ±5%)
✅ Power Rating: 0.25W, 1/4W (meets minimum required ≥0.25W)
✅ Type: Thick Film (matches required Thick Film)
✅ Package: 1206 (matches required 1206)
✅ Mounting Type: Surface Mount (matches required Surface Mount)
✅ Operating Temperature Range: −55°C to +125°C (matches required −55°C to +125°C or better)
✅ RoHS Compliance: ROHS3 Compliant (meets required RoHS compliance)
All requirements are satisfied, and the selected part (KOA Speer RK73B2BRTTD103J) is an approved replacement for the specified through-hole resistor in your retrofit application.
✅ Resistance: 10kΩ (matches required 10kΩ)
✅ Tolerance: ±5% (matches required ±5%)
✅ Power Rating: 0.25W, 1/4W (meets minimum required ≥0.25W)
✅ Type: Thick Film (matches required Thick Film)
✅ Package: 1206 (matches required 1206)
✅ Mounting Type: Surface Mount (matches required Surface Mount)
✅ Operating Temperature Range: −55°C to +125°C (matches required −55°C to +125°C or better)
✅ RoHS Compliance: ROHS3 Compliant (meets required RoHS compliance)
All requirements are satisfied, and the selected part (KOA Speer RK73B2BRTTD103J) is an approved replacement for the specified through-hole resistor in your retrofit application.
Was this helpful?
Upvote
Downvote