4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
A130183TR-ND
| DigiKey Part No | A130183TR-ND |
| Mfr Part No | CRGCQ1206J10K |
| Manufacturer | TE Connectivity Passive Product |
RES 10K OHM 5% 1/4W 1206
10 kOhms ±5% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Automotive AEC-Q200, Moisture Resistant Thick Film
Powered by
EW
Response By EW AI
Specification comparison for TE Connectivity CRGCQ1206J10K vs. required SMD resistor:
✅ Resistance: 10kΩ (matches requirement)
✅ Tolerance: ±5% (matches requirement)
✅ Power Rating: 0.25W (meets minimum requirement of ≥0.25W)
✅ Type: Thick Film (matches requirement)
✅ Package: 1206 (matches requirement)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: −55°C to +155°C (better than required −55°C to +125°C)
✅ RoHS Compliance: Yes, ROHS3 Compliant (matches requirement)
All requirements are satisfied, and component is approved as a suitable replacement.
✅ Resistance: 10kΩ (matches requirement)
✅ Tolerance: ±5% (matches requirement)
✅ Power Rating: 0.25W (meets minimum requirement of ≥0.25W)
✅ Type: Thick Film (matches requirement)
✅ Package: 1206 (matches requirement)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: −55°C to +155°C (better than required −55°C to +125°C)
✅ RoHS Compliance: Yes, ROHS3 Compliant (matches requirement)
All requirements are satisfied, and component is approved as a suitable replacement.
Was this helpful?
Upvote
Downvote