4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
CRP1206-BZ-1002ELF
| DigiKey Part No | CRP1206-BZ-1002ELF-ND |
| Mfr Part No | CRP1206-BZ-1002ELF |
| Manufacturer | Bourns Inc. |
RES SMD 10K OHM 0.1% 1/4W 1206
10 kOhms ±0.1% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Thick Film
Powered by
EW
Response By EW AI
Specification comparison:
✅ Resistance: 10kΩ (matches requirement)
✅ Tolerance: ±0.1% (better than required ±5%)
✅ Power Rating: 0.25W (meets minimum required ≥0.25W)
✅ Type: Thick Film (matches requirement)
✅ Package: 1206 (matches requirement)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: −55°C to +125°C (meets requirement)
✅ RoHS Compliance: Yes (ROHS3 Compliant)
All requirements are satisfied, and the selected SMD resistor (Bourns CRP1206-BZ-1002ELF) is approved as a suitable replacement.
✅ Resistance: 10kΩ (matches requirement)
✅ Tolerance: ±0.1% (better than required ±5%)
✅ Power Rating: 0.25W (meets minimum required ≥0.25W)
✅ Type: Thick Film (matches requirement)
✅ Package: 1206 (matches requirement)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: −55°C to +125°C (meets requirement)
✅ RoHS Compliance: Yes (ROHS3 Compliant)
All requirements are satisfied, and the selected SMD resistor (Bourns CRP1206-BZ-1002ELF) is approved as a suitable replacement.
Was this helpful?
Upvote
Downvote