4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
311-10.0KFRTR-ND
| DigiKey Part No | 311-10.0KFRTR-ND |
| Mfr Part No | RC1206FR-0710KL |
| Manufacturer | YAGEO |
RES 10K OHM 1% 1/4W 1206
10 kOhms ±1% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film
Powered by
EW
Response By EW AI
Comparison of required vs. selected SMD resistor:
✅ Resistance: 10kΩ required, 10kΩ provided.
✅ Tolerance: ±5% required, ±1% provided (better than required).
✅ Power Rating: ≥0.25W required, 0.25W provided.
✅ Type: Thick Film required, Thick Film provided.
✅ Package: 1206 required, 1206 provided.
✅ Mounting Type: Surface Mount required, Surface Mount (chip resistor) provided.
✅ Operating Temperature Range: −55°C to +125°C or better required, −55°C to +155°C provided (better than required).
✅ RoHS Compliance: Yes required, ROHS3 Compliant provided.
All requirements are satisfied, and the selected component is approved as a suitable replacement.
✅ Resistance: 10kΩ required, 10kΩ provided.
✅ Tolerance: ±5% required, ±1% provided (better than required).
✅ Power Rating: ≥0.25W required, 0.25W provided.
✅ Type: Thick Film required, Thick Film provided.
✅ Package: 1206 required, 1206 provided.
✅ Mounting Type: Surface Mount required, Surface Mount (chip resistor) provided.
✅ Operating Temperature Range: −55°C to +125°C or better required, −55°C to +155°C provided (better than required).
✅ RoHS Compliance: Yes required, ROHS3 Compliant provided.
All requirements are satisfied, and the selected component is approved as a suitable replacement.
Was this helpful?
Upvote
Downvote