4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
118-CRM1206-JW-103ELFTR-ND
| DigiKey Part No | 118-CRM1206-JW-103ELFTR-ND |
| Mfr Part No | CRM1206-JW-103ELF |
| Manufacturer | Bourns Inc. |
RES SMD 10K OHM 5% 1/2W 1206
10 kOhms ±5% 0.5W, 1/2W Chip Resistor 1206 (3216 Metric) Current Sense Thick Film
Powered by
EW
Response By EW AI
Technical evaluation of selected SMD resistor (Bourns CRM1206-JW-103ELF) against required specifications:
✅ Resistance: 10kΩ (matches requirement)
✅ Tolerance: ±5% (matches requirement)
✅ Power Rating: 0.5W (≥0.25W required, matches and exceeds requirement)
✅ Type: Thick Film (matches requirement)
✅ Package: 1206 (matches requirement)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: −55°C to +155°C (better than required −55°C to +125°C)
✅ RoHS Compliance: Yes (ROHS3 Compliant, matches requirement)
All requirements are satisfied, and the component is approved as a suitable replacement.
✅ Resistance: 10kΩ (matches requirement)
✅ Tolerance: ±5% (matches requirement)
✅ Power Rating: 0.5W (≥0.25W required, matches and exceeds requirement)
✅ Type: Thick Film (matches requirement)
✅ Package: 1206 (matches requirement)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: −55°C to +155°C (better than required −55°C to +125°C)
✅ RoHS Compliance: Yes (ROHS3 Compliant, matches requirement)
All requirements are satisfied, and the component is approved as a suitable replacement.
Was this helpful?
Upvote
Downvote