4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
RC1206JR-0710KL
| DigiKey Part No | 311-10KERTR-ND |
| Mfr Part No | RC1206JR-0710KL |
| Manufacturer | YAGEO |
RES 10K OHM 5% 1/4W 1206
10 kOhms ±5% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film
Powered by
EW
Response By EW AI
Specification Comparison for YAGEO RC1206JR-0710KL:
✅ Resistance: 10kΩ (matches required 10kΩ)
✅ Tolerance: ±5% (matches required ±5%)
✅ Power Rating: 0.25W (meets required ≥0.25W)
✅ Type: Thick Film (matches requirement)
✅ Package: 1206 (matches required 1206)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: −55°C to +155°C (meets or exceeds required −55°C to +125°C)
✅ RoHS Compliance: Yes (ROHS3 Compliant)
All requirements are satisfied, and the component is approved as a suitable replacement for the specified through-hole resistor.
✅ Resistance: 10kΩ (matches required 10kΩ)
✅ Tolerance: ±5% (matches required ±5%)
✅ Power Rating: 0.25W (meets required ≥0.25W)
✅ Type: Thick Film (matches requirement)
✅ Package: 1206 (matches required 1206)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: −55°C to +155°C (meets or exceeds required −55°C to +125°C)
✅ RoHS Compliance: Yes (ROHS3 Compliant)
All requirements are satisfied, and the component is approved as a suitable replacement for the specified through-hole resistor.
Was this helpful?
Upvote
Downvote