4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
CR1206-JW-103ELF
| DigiKey Part No | CR1206-JW-103ELFTR-ND |
| Mfr Part No | CR1206-JW-103ELF |
| Manufacturer | Bourns Inc. |
RES SMD 10K OHM 5% 1/4W 1206
10 kOhms ±5% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film
Powered by
EW
Response By EW AI
Evaluation of Selected SMD Resistor (Bourns CR1206-JW-103ELF):
Conclusion: All required specifications are satisfied. The selected SMD resistor is a fully suitable replacement for the specified through-hole resistor.
- ✅ Resistance: 10kΩ — Matches required value.
- ✅ Tolerance: ±5% — Matches requirement.
- ✅ Power Rating: 0.25W (1/4W) — Meets minimum needed (≥0.25W).
- ✅ Type: Thick Film — Matches required type.
- ✅ Package: 1206 — Matches required SMD size.
- ✅ Mounting Type: Surface Mount — Satisfies SMD retrofit requirement.
- ✅ Operating Temperature Range: −55°C to +155°C — Meets or exceeds required (−55°C to +125°C).
- ✅ RoHS Compliance: ROHS3 Compliant — Meets environmental requirements.
Conclusion: All required specifications are satisfied. The selected SMD resistor is a fully suitable replacement for the specified through-hole resistor.
Was this helpful?
Upvote
Downvote