4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
CR1206-JW-103ELFTR-ND
| DigiKey Part No | CR1206-JW-103ELFTR-ND |
| Mfr Part No | CR1206-JW-103ELF |
| Manufacturer | Bourns Inc. |
RES SMD 10K OHM 5% 1/4W 1206
10 kOhms ±5% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film
Powered by
EW
Response By EW AI
Specification evaluation for Bourns CR1206-JW-103ELF as replacement SMD resistor:
✅ Resistance: 10kΩ (matches required 10kΩ)
✅ Tolerance: ±5% (matches required ±5%)
✅ Power Rating: 0.25W (matches required ≥0.25W)
✅ Type: Thick Film (matches requirement)
✅ Package: 1206 (matches requirement)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: −55°C to +155°C (exceeds required −55°C to +125°C)
✅ RoHS Compliance: Yes (part is ROHS3 compliant)
All requirements are satisfied, and this component is approved as a suitable replacement.
✅ Resistance: 10kΩ (matches required 10kΩ)
✅ Tolerance: ±5% (matches required ±5%)
✅ Power Rating: 0.25W (matches required ≥0.25W)
✅ Type: Thick Film (matches requirement)
✅ Package: 1206 (matches requirement)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: −55°C to +155°C (exceeds required −55°C to +125°C)
✅ RoHS Compliance: Yes (part is ROHS3 compliant)
All requirements are satisfied, and this component is approved as a suitable replacement.
Was this helpful?
Upvote
Downvote