4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
HVCB1206FKC10K0TR-ND
| DigiKey Part No | HVCB1206FKC10K0TR-ND |
| Mfr Part No | HVCB1206FKC10K0 |
| Manufacturer | Stackpole Electronics Inc |
RES 10K OHM 1% 1/3W 1206
10 kOhms ±1% 0.333W, 1/3W Chip Resistor 1206 (3216 Metric) High Voltage, Moisture Resistant, Pulse Withstanding Thick Film
Powered by
EW
Response By EW AI
Technical Evaluation of Replacement SMD Resistor:
✅ Resistance: 10 kΩ (Matches requirement)
✅ Tolerance: ±1% (Tighter than required ±5%)
✅ Power Rating: 0.333 W (Exceeds minimum required 0.25 W)
✅ Type: Thick Film (Matches requirement)
✅ Package: 1206 (Matches requirement)
✅ Mounting Type: Surface Mount (Matches requirement)
✅ Operating Temperature Range: -55°C to +150°C (Exceeds minimum requirement of -55°C to +125°C)
✅ RoHS Compliance: Yes (ROHS3 Compliant)
All requirements are satisfied, and the selected SMD resistor is approved as a suitable replacement for the specified through-hole part.
✅ Resistance: 10 kΩ (Matches requirement)
✅ Tolerance: ±1% (Tighter than required ±5%)
✅ Power Rating: 0.333 W (Exceeds minimum required 0.25 W)
✅ Type: Thick Film (Matches requirement)
✅ Package: 1206 (Matches requirement)
✅ Mounting Type: Surface Mount (Matches requirement)
✅ Operating Temperature Range: -55°C to +150°C (Exceeds minimum requirement of -55°C to +125°C)
✅ RoHS Compliance: Yes (ROHS3 Compliant)
All requirements are satisfied, and the selected SMD resistor is approved as a suitable replacement for the specified through-hole part.
Was this helpful?
Upvote
Downvote