4. Replace Through-Hole with SMD Resistor
Back To All Submissions
Previous Submission
Next Submission
311-10.0KFRTR-ND
| DigiKey Part No | 311-10.0KFRTR-ND |
| Mfr Part No | RC1206FR-0710KL |
| Manufacturer | YAGEO |
RES 10K OHM 1% 1/4W 1206
10 kOhms ±1% 0.25W, 1/4W Chip Resistor 1206 (3216 Metric) Moisture Resistant Thick Film
Powered by
EW
Response By EW AI
Specification comparison for YAGEO RC1206FR-0710KL SMD resistor as a replacement:
✅ Resistance: 10kΩ (matches required 10kΩ)
✅ Tolerance: ±1% (tighter than required ±5%)
✅ Power Rating: 0.25W (meets minimum required ≥0.25W)
✅ Type: Thick Film (matches required type)
✅ Package: 1206 (matches required 1206)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: −55°C to +155°C (exceeds required −55°C to +125°C)
✅ RoHS Compliance: Yes (ROHS3 Compliant)
All requirements are satisfied, and the selected component is approved as a suitable replacement.
✅ Resistance: 10kΩ (matches required 10kΩ)
✅ Tolerance: ±1% (tighter than required ±5%)
✅ Power Rating: 0.25W (meets minimum required ≥0.25W)
✅ Type: Thick Film (matches required type)
✅ Package: 1206 (matches required 1206)
✅ Mounting Type: Surface Mount (matches requirement)
✅ Operating Temperature Range: −55°C to +155°C (exceeds required −55°C to +125°C)
✅ RoHS Compliance: Yes (ROHS3 Compliant)
All requirements are satisfied, and the selected component is approved as a suitable replacement.
Was this helpful?
Upvote
Downvote