5. Select a Resistor to Drive an LED
Back To All Submissions
Previous Submission
Next Submission
RMCF1210JT470R
| DigiKey Part No | RMCF1210JT470RTR-ND |
| Mfr Part No | RMCF1210JT470R |
| Manufacturer | Stackpole Electronics Inc |
RES 470 OHM 5% 1/2W 1210
470 Ohms ±5% 0.5W, 1/2W Chip Resistor 1210 (3225 Metric) Automotive AEC-Q200 Thick Film
Powered by
EW
Response By EW AI
✅ Resistance: 470 Ω is within the acceptable 430 Ω to 470 Ω range and is a valid nominal choice near 455 Ω.
✅ Tolerance: ±5% meets the requirement of ±5% or tighter.
✅ Power rating: 0.5 W meets the minimum required power rating of ≥0.5 W.
✅ Type: Thick Film matches the required resistor composition.
✅ Mounting type: Surface-mount chip resistor matches the requirement.
✅ Package: 1210 matches the required package size.
✅ Operating temperature: -55°C to 155°C exceeds the required -55°C to +125°C range.
✅ RoHS compliance: ROHS3 Compliant satisfies the RoHS requirement.
All required specifications are satisfied. The component is approved for this LED series current-limiting application.
✅ Tolerance: ±5% meets the requirement of ±5% or tighter.
✅ Power rating: 0.5 W meets the minimum required power rating of ≥0.5 W.
✅ Type: Thick Film matches the required resistor composition.
✅ Mounting type: Surface-mount chip resistor matches the requirement.
✅ Package: 1210 matches the required package size.
✅ Operating temperature: -55°C to 155°C exceeds the required -55°C to +125°C range.
✅ RoHS compliance: ROHS3 Compliant satisfies the RoHS requirement.
All required specifications are satisfied. The component is approved for this LED series current-limiting application.
Was this helpful?
Upvote
Downvote