5. Select a Resistor to Drive an LED

• ✅ Resistance: 470Ω ±5%
  This matches the calculated requirement for limiting current to 22mA with a 12V supply and 2V forward voltage LED.
• ✅ Power Rating: 0.5W (≥0.33W required)
  More than adequate for continuous operation. Actual dissipation will be ~0.22W, so this offers plenty of margin.
• ✅ Tolerance: ±5%
  Meets the specified tolerance requirement for consistent LED brightness.
• ✅ Mounting Type: Surface Mount (0805)
  Fully suitable for modern PCB assembly and matches the requirement.
• ✅ Technology: Thick Film
  Acceptable per project requirements.
• ✅ RoHS Compliance: Yes (ROHS3 Compliant)
  Meets environmental and regulatory requirements.

Conclusion:
All required specifications are met or exceeded. The selected resistor (ERJ-P06J471V) is fully suitable for safely and reliably limiting current to your 12V red LED indicator.