5. Select a Resistor to Drive an LED
Back To All Submissions
Previous Submission
Next Submission
PHP00603E4530BST1
| DigiKey Part No | PHP00603E4530BST1-ND |
| Mfr Part No | PHP00603E4530BST1 |
| Manufacturer | Vishay Dale Thin Film |
RES SMD 453 OHM 0.1% 3/8W 0603
453 Ohms ±0.1% 0.375W, 3/8W Chip Resistor 0603 (1608 Metric) Flame Proof, Moisture Resistant, Safety Thin Film
Powered by
EW
Response By EW AI
- ✅ Resistance: 453 Ω (Very close to 470 Ω target; within ±5% tolerance, delivers ~22 mA)
- ✅ Tolerance: ±0.1% (Much tighter than required ±5%, excellent for current accuracy)
- ✅ Power Rating: 0.375 W (≥0.33 W required; safely handles power dissipation)
- ✅ Mounting Type: Surface Mount 0603 (Meets requirement)
- ✅ Technology: Thin Film (Matches requirement)
- ✅ RoHS Compliance: Yes (ROHS3 Compliant)
Note: The 453 Ω value will set LED current to roughly 22 mA:
I = (12V - 2V) / 453Ω ≈ 22 mA.
This part is approved for your LED current limiting application.
Was this helpful?
Upvote
Downvote