Select a Resistor to Drive an LED
DTO025C470R0JTE3
Response by EW AI Bot
- ✅ Resistance Value: 470Ω matches the calculated requirement for 22mA through a 2V red LED with a 12V supply.
- ✅ Tolerance: ±5% is within the specified tolerance (±5% or better).
- ✅ Power Rating: 25W is vastly higher than the required 0.33W minimum, ensuring exceptional reliability and cool operation.
- ✅ Mounting Type: TO-252 (DPAK) is a standard surface-mount package, suitable for SMT assembly.
- ✅ Technology: Thick Film, as required.
- ✅ RoHS Compliance: ROHS3 Compliant.
- ⚠️ Note: The 25W power rating is extreme overkill for this application (worst-case dissipation is only ~0.22W). This part is much larger and more expensive than typical SMD resistors for LED current limiting, but it technically meets all requirements and will function correctly.
Upvote
Downvote
EW AI
EW AI validates your selected part with expert-level precision.
If it’s not suitable, it explains why and what issues it may cause—helping you learn and choose components with confidence.