67. Triac Output Optocoupler for AC Load Control
Back To All Submissions
Previous Submission
Next Submission
58-MOC3062SM-ND
| DigiKey Part No | 58-MOC3062SM-ND |
| Mfr Part No | MOC3062SM |
| Manufacturer | Isocom Components 2004 LTD |
OPTOISOLATR 5.3KV PWR TRIAC 1CH
Optoisolator Triac, Power Output 5300Vrms 1 Channel
Powered by
EW
Response By EW AI
✅ Output Type: Triac, Power; satisfies the required triac output.
✅ Zero Crossing Circuit: Yes; required for reduced EMI during AC switching.
✅ Number of Channels: 1; matches requirement.
✅ Voltage - Isolation: 5300Vrms; exceeds the minimum 4170Vrms requirement.
✅ Voltage - Off State: 600V; exceeds the minimum 400V requirement for 230VAC mains margin.
✅ Static dV/dt (Min): 600V/µs; meets the minimum requirement.
✅ Current - LED Trigger (Ift) (Max): 10mA; within the required maximum of 15mA and suitable for a 5mA to 10mA drive range.
✅ Voltage - Forward (Vf) (Typ): 1.2V; below the 1.5V maximum.
✅ Current - DC Forward (If) (Max): 50mA; meets the minimum required input LED current rating.
✅ Mounting Type: Surface Mount; matches requirement.
✅ Package / Case: 6-SMD, Gull Wing; satisfies the 6-SMD package requirement.
✅ Operating Temperature: -40°C to 100°C; meets and exceeds the required -40°C to +85°C range.
✅ RoHS Compliance: ROHS3 Compliant; satisfies requirement.
✅ DigiKey category alignment: listed under Optoisolators - Triac, SCR Output, which matches the required category.
All required specifications are satisfied. This component is approved for the stated isolated zero-cross triac gate drive application.
✅ Zero Crossing Circuit: Yes; required for reduced EMI during AC switching.
✅ Number of Channels: 1; matches requirement.
✅ Voltage - Isolation: 5300Vrms; exceeds the minimum 4170Vrms requirement.
✅ Voltage - Off State: 600V; exceeds the minimum 400V requirement for 230VAC mains margin.
✅ Static dV/dt (Min): 600V/µs; meets the minimum requirement.
✅ Current - LED Trigger (Ift) (Max): 10mA; within the required maximum of 15mA and suitable for a 5mA to 10mA drive range.
✅ Voltage - Forward (Vf) (Typ): 1.2V; below the 1.5V maximum.
✅ Current - DC Forward (If) (Max): 50mA; meets the minimum required input LED current rating.
✅ Mounting Type: Surface Mount; matches requirement.
✅ Package / Case: 6-SMD, Gull Wing; satisfies the 6-SMD package requirement.
✅ Operating Temperature: -40°C to 100°C; meets and exceeds the required -40°C to +85°C range.
✅ RoHS Compliance: ROHS3 Compliant; satisfies requirement.
✅ DigiKey category alignment: listed under Optoisolators - Triac, SCR Output, which matches the required category.
All required specifications are satisfied. This component is approved for the stated isolated zero-cross triac gate drive application.
Was this helpful?
Upvote
Downvote