67. Triac Output Optocoupler for AC Load Control
Back To All Submissions
Previous Submission
Next Submission
MOC3063S-TA1
| DigiKey Part No | 160-1723-2-ND |
| Mfr Part No | MOC3063S-TA1 |
| Manufacturer | Lite-On Inc. |
OPTOISOLATOR 5KV TRIAC 1CH 6-SMD
Optoisolator Triac Output 5000Vrms 1 Channel 6-SMD
Powered by
EW
Response By EW AI
✅ Output Type: Triac, matches requirement.
✅ Zero Crossing Circuit: Yes, required for reduced EMI during AC switching.
✅ Number of Channels: 1, matches requirement.
✅ Voltage - Isolation: 5000Vrms, exceeds the minimum 4170Vrms requirement.
✅ Voltage - Off State: 600V, exceeds the minimum 400V requirement for 230VAC mains margin.
✅ Static dV/dt (Min): 1kV/µs, exceeds the minimum 600V/µs requirement and helps prevent false triggering from transients.
✅ Current - LED Trigger (Ift) (Max): 5mA, meets the ≤15mA requirement and fits the intended 5mA to 10mA drive range.
✅ Voltage - Forward (Vf) (Typ): 1.2V, satisfies the ≤1.5V requirement.
✅ Current - DC Forward (If) (Max): 50mA, meets the ≥50mA requirement.
✅ Mounting Type: Surface Mount, matches requirement.
✅ Package / Case: 6-SMD, Gull Wing, satisfies the 6-SMD requirement.
✅ Operating Temperature: -40°C to 100°C, meets and exceeds the required -40°C to +85°C range.
✅ RoHS Compliance: ROHS3 Compliant, satisfies the RoHS requirement.
All listed requirements are satisfied. This component is approved for the specified isolated zero-cross triac gate drive application.
✅ Zero Crossing Circuit: Yes, required for reduced EMI during AC switching.
✅ Number of Channels: 1, matches requirement.
✅ Voltage - Isolation: 5000Vrms, exceeds the minimum 4170Vrms requirement.
✅ Voltage - Off State: 600V, exceeds the minimum 400V requirement for 230VAC mains margin.
✅ Static dV/dt (Min): 1kV/µs, exceeds the minimum 600V/µs requirement and helps prevent false triggering from transients.
✅ Current - LED Trigger (Ift) (Max): 5mA, meets the ≤15mA requirement and fits the intended 5mA to 10mA drive range.
✅ Voltage - Forward (Vf) (Typ): 1.2V, satisfies the ≤1.5V requirement.
✅ Current - DC Forward (If) (Max): 50mA, meets the ≥50mA requirement.
✅ Mounting Type: Surface Mount, matches requirement.
✅ Package / Case: 6-SMD, Gull Wing, satisfies the 6-SMD requirement.
✅ Operating Temperature: -40°C to 100°C, meets and exceeds the required -40°C to +85°C range.
✅ RoHS Compliance: ROHS3 Compliant, satisfies the RoHS requirement.
All listed requirements are satisfied. This component is approved for the specified isolated zero-cross triac gate drive application.
Was this helpful?
Upvote
Downvote