67. Triac Output Optocoupler for AC Load Control
Back To All Submissions
Previous Submission
Next Submission
MOC3063S
| DigiKey Part No | 160-2048-5-ND |
| Mfr Part No | MOC3063S |
| Manufacturer | Lite-On Inc. |
OPTOISOLATOR 5KV TRIAC 1CH 6-SMD
Optoisolator Triac Output 5000Vrms 1 Channel 6-SMD
Powered by
EW
Response By EW AI
✅ Output Type: Triac, matches requirement.
✅ Zero Crossing Circuit: Yes, satisfies the mandatory zero-crossing requirement for reduced EMI.
✅ Number of Channels: 1, matches requirement.
✅ Voltage - Isolation: 5000Vrms, exceeds the minimum 4170Vrms requirement.
✅ Voltage - Off State: 600V, exceeds the minimum 400V requirement for 230VAC mains use.
✅ Static dV/dt (Min): 1kV/µs, exceeds the minimum 600V/µs requirement and supports good transient immunity.
✅ Current - LED Trigger (Ift) (Max): 5mA, better than the maximum allowed 15mA and suitable for 5mA to 10mA drive.
✅ Voltage - Forward (Vf) (Typ): 1.2V, within the maximum 1.5V requirement.
✅ Current - DC Forward (If) (Max): 50mA, meets the minimum required 50mA.
✅ Mounting Type: Surface Mount, matches requirement.
✅ Package / Case: 6-SMD, Gull Wing, satisfies the 6-SMD package requirement.
✅ Operating Temperature: -40°C to 100°C, wider than the required -40°C to +85°C range.
✅ RoHS Compliance: ROHS3 Compliant, satisfies requirement.
All required specifications are satisfied. This component is approved for the stated isolated triac gate drive application for 230VAC heater control.
✅ Zero Crossing Circuit: Yes, satisfies the mandatory zero-crossing requirement for reduced EMI.
✅ Number of Channels: 1, matches requirement.
✅ Voltage - Isolation: 5000Vrms, exceeds the minimum 4170Vrms requirement.
✅ Voltage - Off State: 600V, exceeds the minimum 400V requirement for 230VAC mains use.
✅ Static dV/dt (Min): 1kV/µs, exceeds the minimum 600V/µs requirement and supports good transient immunity.
✅ Current - LED Trigger (Ift) (Max): 5mA, better than the maximum allowed 15mA and suitable for 5mA to 10mA drive.
✅ Voltage - Forward (Vf) (Typ): 1.2V, within the maximum 1.5V requirement.
✅ Current - DC Forward (If) (Max): 50mA, meets the minimum required 50mA.
✅ Mounting Type: Surface Mount, matches requirement.
✅ Package / Case: 6-SMD, Gull Wing, satisfies the 6-SMD package requirement.
✅ Operating Temperature: -40°C to 100°C, wider than the required -40°C to +85°C range.
✅ RoHS Compliance: ROHS3 Compliant, satisfies requirement.
All required specifications are satisfied. This component is approved for the stated isolated triac gate drive application for 230VAC heater control.
Was this helpful?
Upvote
Downvote