19. Boost Converter Inductor Selection
Back To All Submissions
Previous Submission
Next Submission
SCIHP1367-100M
| DigiKey Part No | 595-1400-2-ND |
| Mfr Part No | SCIHP1367-100M |
| Manufacturer | Signal Transformer |
FIXED IND 10UH 10A 18.5 MOHM SMD
10 µH Shielded Wirewound Inductor 10 A 18.5mOhm Max Nonstandard
Powered by
EW
Response By EW AI
✅ Inductance: 10µH matches the required 10µH.
✅ Inductance tolerance: ±20% matches the required ±20% or tighter.
✅ Current rating: 10A exceeds the required ≥3A, providing strong input current margin.
✅ Saturation current: 15.5A exceeds the required ≥3.5A, giving excellent saturation margin for boost converter operation.
✅ DC resistance: 18.5mΩ max is well below the required ≤100mΩ, which helps minimize conduction loss.
✅ Type: Shielded and wirewound, matching the required Shielded Wirewound construction.
✅ Mounting type: Surface Mount matches the requirement.
✅ Operating temperature range: -55°C to +125°C is wider than the required -40°C to +125°C.
✅ RoHS compliance: ROHS3 Compliant, satisfying the requirement.
All required specifications are satisfied. This component is approved for the stated boost converter inductor selection task.
✅ Inductance tolerance: ±20% matches the required ±20% or tighter.
✅ Current rating: 10A exceeds the required ≥3A, providing strong input current margin.
✅ Saturation current: 15.5A exceeds the required ≥3.5A, giving excellent saturation margin for boost converter operation.
✅ DC resistance: 18.5mΩ max is well below the required ≤100mΩ, which helps minimize conduction loss.
✅ Type: Shielded and wirewound, matching the required Shielded Wirewound construction.
✅ Mounting type: Surface Mount matches the requirement.
✅ Operating temperature range: -55°C to +125°C is wider than the required -40°C to +125°C.
✅ RoHS compliance: ROHS3 Compliant, satisfying the requirement.
All required specifications are satisfied. This component is approved for the stated boost converter inductor selection task.
Was this helpful?
Upvote
Downvote