19. Boost Converter Inductor Selection
Back To All Submissions
Previous Submission
Next Submission
LAYPH10060DL100MGA
| DigiKey Part No | 587-LAYPH10060DL100MGATR-ND |
| Mfr Part No | LAYPH10060DL100MGA |
| Manufacturer | Taiyo Yuden |
FIXED IND 10UH 3A 22 MOHM SMD
10 µH Shielded Wirewound Inductor 3 A 22mOhm Nonstandard
Powered by
EW
Response By EW AI
✅ Inductance: 10µH matches the required 10µH.
✅ Inductance tolerance: ±20% matches the required ±20% or tighter.
✅ Current rating: 3A meets the minimum required ≥3A.
✅ Saturation current: 4.3A exceeds the minimum required ≥3.5A, providing adequate saturation margin.
✅ DC resistance: 22mΩ is well below the maximum allowed 100mΩ, which helps reduce conduction loss.
✅ Type: Shielded wirewound is explicitly specified and matches the requirement.
✅ Mounting type: Surface Mount matches the requirement.
✅ Operating temperature range: -55°C to 150°C exceeds the required -40°C to +125°C range.
✅ RoHS compliance: ROHS3 Compliant satisfies the requirement.
All required specifications are satisfied. This component is approved for the boost converter inductor selection.
✅ Inductance tolerance: ±20% matches the required ±20% or tighter.
✅ Current rating: 3A meets the minimum required ≥3A.
✅ Saturation current: 4.3A exceeds the minimum required ≥3.5A, providing adequate saturation margin.
✅ DC resistance: 22mΩ is well below the maximum allowed 100mΩ, which helps reduce conduction loss.
✅ Type: Shielded wirewound is explicitly specified and matches the requirement.
✅ Mounting type: Surface Mount matches the requirement.
✅ Operating temperature range: -55°C to 150°C exceeds the required -40°C to +125°C range.
✅ RoHS compliance: ROHS3 Compliant satisfies the requirement.
All required specifications are satisfied. This component is approved for the boost converter inductor selection.
Was this helpful?
Upvote
Downvote