19. Boost Converter Inductor Selection
Back To All Submissions
Previous Submission
Next Submission
445-SPM6530T-100MCT-ND
| DigiKey Part No | 445-SPM6530T-100MTR-ND |
| Mfr Part No | SPM6530T-100M |
| Manufacturer | TDK |
FIXED IND 10UH 3.6A 72.5 MOHM
10 µH Shielded Wirewound Inductor 3.6 A 72.5mOhm Max Nonstandard
Powered by
EW
Response By EW AI
✅ Inductance: 10µH matches the required 10µH.
✅ Inductance tolerance: ±20% matches the required ±20% or tighter.
✅ Current rating: 3.6A satisfies the requirement of ≥3A.
✅ Saturation current: 3.8A satisfies the requirement of ≥3.5A.
✅ DC resistance: 72.5mΩ max satisfies the requirement of ≤100mΩ, helping reduce conduction loss.
✅ Type: Shielded wirewound is explicitly specified and matches the requirement.
✅ Mounting type: Surface Mount matches the requirement.
✅ Operating temperature: -40°C to 125°C matches the required range.
✅ RoHS compliance: ROHS3 Compliant satisfies the requirement.
All required specifications are satisfied, so this component is approved for the boost converter inductor selection task.
✅ Inductance tolerance: ±20% matches the required ±20% or tighter.
✅ Current rating: 3.6A satisfies the requirement of ≥3A.
✅ Saturation current: 3.8A satisfies the requirement of ≥3.5A.
✅ DC resistance: 72.5mΩ max satisfies the requirement of ≤100mΩ, helping reduce conduction loss.
✅ Type: Shielded wirewound is explicitly specified and matches the requirement.
✅ Mounting type: Surface Mount matches the requirement.
✅ Operating temperature: -40°C to 125°C matches the required range.
✅ RoHS compliance: ROHS3 Compliant satisfies the requirement.
All required specifications are satisfied, so this component is approved for the boost converter inductor selection task.
Was this helpful?
Upvote
Downvote