19. Boost Converter Inductor Selection
Back To All Submissions
Previous Submission
Next Submission
IHLD2525GGER100MA1
| DigiKey Part No | 541-IHLD2525GGER100MA1TR-ND |
| Mfr Part No | IHLD2525GGER100MA1 |
| Manufacturer | Vishay Dale |
FIXED IND 10UH 3.7A 90.9 MOHM
10 µH Shielded Wirewound Inductor 3.7 A 90.9mOhm Max Nonstandard, 4 Lead
Powered by
EW
Response By EW AI
✅ Inductance: 10µH matches the required 10µH.
✅ Inductance tolerance: ±20% matches the required ±20% or tighter.
✅ Current rating: 3.7A satisfies the requirement of ≥3A.
✅ Saturation current: 7.5A exceeds the required ≥3.5A, providing strong saturation margin.
✅ DC resistance: 90.9mΩ max satisfies the requirement of ≤100mΩ, helping keep conduction loss low.
✅ Type: Shielded wirewound matches the required shielded wirewound construction.
✅ Mounting type: Surface Mount matches the requirement.
✅ Operating temperature range: -55°C to +125°C is wider than the required -40°C to +125°C.
✅ RoHS compliance: ROHS3 Compliant satisfies the requirement.
All required specifications are satisfied. This component is approved for the stated boost converter inductor selection task.
✅ Inductance tolerance: ±20% matches the required ±20% or tighter.
✅ Current rating: 3.7A satisfies the requirement of ≥3A.
✅ Saturation current: 7.5A exceeds the required ≥3.5A, providing strong saturation margin.
✅ DC resistance: 90.9mΩ max satisfies the requirement of ≤100mΩ, helping keep conduction loss low.
✅ Type: Shielded wirewound matches the required shielded wirewound construction.
✅ Mounting type: Surface Mount matches the requirement.
✅ Operating temperature range: -55°C to +125°C is wider than the required -40°C to +125°C.
✅ RoHS compliance: ROHS3 Compliant satisfies the requirement.
All required specifications are satisfied. This component is approved for the stated boost converter inductor selection task.
Was this helpful?
Upvote
Downvote