19. Boost Converter Inductor Selection
Back To All Submissions
Previous Submission
Next Submission
595-F2D3-1056-100MTR-ND
| DigiKey Part No | 595-F2D3-1056-100MTR-ND |
| Mfr Part No | F2D3-1056-100M |
| Manufacturer | Signal Transformer |
FIXED IND 10UH 5.8A 19 MOHM SMD
10 µH Shielded Wirewound Inductor 5.8 A 19mOhm Max Nonstandard, 3 Lead
Powered by
EW
Response By EW AI
✅ Inductance: 10µH matches the required 10µH.
✅ Inductance tolerance: ±20% matches the required ±20% or tighter.
✅ Current rating: 5.8A exceeds the required ≥3A.
✅ Saturation current: 6A exceeds the required ≥3.5A.
✅ DC resistance: 19mΩ max is well below the required ≤100mΩ, helping reduce conduction loss.
✅ Type: Shielded wirewound matches the required shielded wirewound construction.
✅ Mounting type: Surface Mount matches the requirement.
✅ Operating temperature: -40°C to +125°C matches the required range.
✅ RoHS compliance: ROHS3 Compliant satisfies the requirement.
All required specifications are satisfied. This component is approved for the stated boost converter inductor application.
✅ Inductance tolerance: ±20% matches the required ±20% or tighter.
✅ Current rating: 5.8A exceeds the required ≥3A.
✅ Saturation current: 6A exceeds the required ≥3.5A.
✅ DC resistance: 19mΩ max is well below the required ≤100mΩ, helping reduce conduction loss.
✅ Type: Shielded wirewound matches the required shielded wirewound construction.
✅ Mounting type: Surface Mount matches the requirement.
✅ Operating temperature: -40°C to +125°C matches the required range.
✅ RoHS compliance: ROHS3 Compliant satisfies the requirement.
All required specifications are satisfied. This component is approved for the stated boost converter inductor application.
Was this helpful?
Upvote
Downvote