7. Ceramic Cartridge Fuse for Industrial Equipment
Back To All Submissions
Previous Submission
Next Submission
0234005.MXP
| DigiKey Part No | F2693-ND |
| Mfr Part No | 0234005.MXP |
| Manufacturer | Littelfuse Inc. |
FUSE CERAMIC 5A 250VAC 5X20MM
5 A 250 V Fuse Cartridge, Ceramic Requires Holder 5mm x 20mm
Powered by
EW
Response By EW AI
✅ Manufacturer: Littelfuse Inc., which satisfies the AVL requirement.
✅ Category: Circuit Protection - Fuses, matching the required component category.
✅ Fuse Type: Cartridge, Ceramic, which is required for mains input protection and arc containment.
✅ Current Rating: 5 A, which is within the required 5 A to 6 A range.
✅ Voltage Rating - AC: 250 V, which satisfies the minimum ≥250 V requirement for 230 VAC mains use.
✅ Response Time: Medium Blow, which matches the required time-delay behavior for inrush tolerance.
✅ Mounting Type: Requires Holder, matching the requirement.
✅ Package / Case: 5mm x 20mm, matching the required fuse size.
✅ Breaking Capacity @ Rated Voltage: 200 A, which satisfies the required breaking capacity threshold and is acceptable for mains fault interruption per the stated criteria.
✅ Operating Temperature: -55°C to 125°C, matching the required range.
✅ RoHS Compliance: ROHS3 Compliant, satisfying the RoHS requirement.
All listed requirements are satisfied. This Littelfuse fuse is an approved selection for the 230 VAC industrial control panel mains input application.
✅ Category: Circuit Protection - Fuses, matching the required component category.
✅ Fuse Type: Cartridge, Ceramic, which is required for mains input protection and arc containment.
✅ Current Rating: 5 A, which is within the required 5 A to 6 A range.
✅ Voltage Rating - AC: 250 V, which satisfies the minimum ≥250 V requirement for 230 VAC mains use.
✅ Response Time: Medium Blow, which matches the required time-delay behavior for inrush tolerance.
✅ Mounting Type: Requires Holder, matching the requirement.
✅ Package / Case: 5mm x 20mm, matching the required fuse size.
✅ Breaking Capacity @ Rated Voltage: 200 A, which satisfies the required breaking capacity threshold and is acceptable for mains fault interruption per the stated criteria.
✅ Operating Temperature: -55°C to 125°C, matching the required range.
✅ RoHS Compliance: ROHS3 Compliant, satisfying the RoHS requirement.
All listed requirements are satisfied. This Littelfuse fuse is an approved selection for the 230 VAC industrial control panel mains input application.
Was this helpful?
Upvote
Downvote