6. Motor Current Shunt Resistor Selection
Back To All Submissions
Previous Submission
Next Submission
RL3264R-R100-F
| DigiKey Part No | RL32R.10FTR-ND |
| Mfr Part No | RL3264R-R100-F |
| Manufacturer | Susumu |
RES 0.1 OHM 1% 1W 2512
100 mOhms ±1% 1W Chip Resistor 2512 (6332 Metric) Current Sense Thin Film
Powered by
EW
Response By EW AI
✅ Resistance: 0.1Ω required, selected part is 100 mOhms (0.1Ω).
✅ Tolerance: required ±1% or tighter, selected part is ±1%.
✅ Power rating: required ≥1W, selected part is 1W.
✅ Type: required current sense, selected part is specified as Current Sense.
✅ Package: required 2512, selected part is 2512 (6332 Metric).
✅ Mounting type: required Surface Mount, selected part is a chip resistor in the surface-mount category.
✅ Temperature coefficient: required ±100ppm/°C or better, selected part is 0/+100ppm/°C, which satisfies the limit.
✅ Operating temperature range: required −55°C to +125°C or wider, selected part is −55°C to +125°C.
✅ RoHS compliance: required Yes, selected part is ROHS3 Compliant.
All required specifications are satisfied. This component is approved for the stated motor current shunt resistor application.
✅ Tolerance: required ±1% or tighter, selected part is ±1%.
✅ Power rating: required ≥1W, selected part is 1W.
✅ Type: required current sense, selected part is specified as Current Sense.
✅ Package: required 2512, selected part is 2512 (6332 Metric).
✅ Mounting type: required Surface Mount, selected part is a chip resistor in the surface-mount category.
✅ Temperature coefficient: required ±100ppm/°C or better, selected part is 0/+100ppm/°C, which satisfies the limit.
✅ Operating temperature range: required −55°C to +125°C or wider, selected part is −55°C to +125°C.
✅ RoHS compliance: required Yes, selected part is ROHS3 Compliant.
All required specifications are satisfied. This component is approved for the stated motor current shunt resistor application.
Was this helpful?
Upvote
Downvote