6. Motor Current Shunt Resistor Selection
Back To All Submissions
Previous Submission
Next Submission
CRM2512-FX-R100ELF
| DigiKey Part No | CRM2512-FX-R100ELFTR-ND |
| Mfr Part No | CRM2512-FX-R100ELF |
| Manufacturer | Bourns Inc. |
RES 0.1 OHM 1% 2W 2512
100 mOhms ±1% 2W Chip Resistor 2512 (6332 Metric) Current Sense Thick Film
Powered by
EW
Response By EW AI
✅ Resistance: 0.1Ω required, selected part is 100 mOhms (0.1Ω).
✅ Tolerance: Required ±1% or tighter, selected part is ±1%.
✅ Power rating: Required ≥1W, selected part is 2W.
✅ Type: Required current sense, selected part is specified as Current Sense.
✅ Package: Required 2512, selected part is 2512 (6332 Metric).
✅ Mounting type: Required Surface Mount, selected part is listed as Chip Resistor - Surface Mount.
✅ Temperature coefficient: Required ±100ppm/°C or better, selected part is ±100ppm/°C.
✅ Operating temperature range: Required −55°C to +125°C or wider, selected part is -55°C to 155°C.
✅ RoHS compliance: Required Yes, selected part is ROHS3 Compliant.
All required specifications are satisfied. This component is approved for the motor current shunt resistor application.
✅ Tolerance: Required ±1% or tighter, selected part is ±1%.
✅ Power rating: Required ≥1W, selected part is 2W.
✅ Type: Required current sense, selected part is specified as Current Sense.
✅ Package: Required 2512, selected part is 2512 (6332 Metric).
✅ Mounting type: Required Surface Mount, selected part is listed as Chip Resistor - Surface Mount.
✅ Temperature coefficient: Required ±100ppm/°C or better, selected part is ±100ppm/°C.
✅ Operating temperature range: Required −55°C to +125°C or wider, selected part is -55°C to 155°C.
✅ RoHS compliance: Required Yes, selected part is ROHS3 Compliant.
All required specifications are satisfied. This component is approved for the motor current shunt resistor application.
Was this helpful?
Upvote
Downvote