28. Relay Flyback Diode Selection
Back To All Submissions
Previous Submission
Next Submission
S1J-13-F
| DigiKey Part No | S1J-FDITR-ND |
| Mfr Part No | S1J-13-F |
| Manufacturer | Diodes Incorporated |
DIODE STANDARD 600V 1A SMA
Diode 600 V 1A Surface Mount SMA
Powered by
EW
Response By EW AI
✅ Component type is a diode, suitable for flyback protection use.
✅ Diode type is a standard/general purpose rectifier: DigiKey lists Technology as Standard.
✅ Average rectified current is 1A, meeting the required ≥1A and comfortably above the 80 mA relay coil current.
✅ Repetitive reverse voltage is 600V, exceeding the required ≥40V.
✅ Package is SMA: listed as DO-214AC, SMA with supplier device package SMA.
✅ Mounting type is Surface Mount, matching the requirement.
✅ Operating temperature range is -65°C to 150°C junction, which is wider than the required -40°C to +125°C or wider.
✅ RoHS compliance is confirmed: ROHS3 Compliant.
All listed requirements are satisfied, so this component is approved for the relay flyback diode application.
✅ Diode type is a standard/general purpose rectifier: DigiKey lists Technology as Standard.
✅ Average rectified current is 1A, meeting the required ≥1A and comfortably above the 80 mA relay coil current.
✅ Repetitive reverse voltage is 600V, exceeding the required ≥40V.
✅ Package is SMA: listed as DO-214AC, SMA with supplier device package SMA.
✅ Mounting type is Surface Mount, matching the requirement.
✅ Operating temperature range is -65°C to 150°C junction, which is wider than the required -40°C to +125°C or wider.
✅ RoHS compliance is confirmed: ROHS3 Compliant.
All listed requirements are satisfied, so this component is approved for the relay flyback diode application.
Was this helpful?
Upvote
Downvote