28. Relay Flyback Diode Selection
Back To All Submissions
Previous Submission
Next Submission
S1J-FDIDKR-ND
| DigiKey Part No | S1J-FDITR-ND |
| Mfr Part No | S1J-13-F |
| Manufacturer | Diodes Incorporated |
DIODE STANDARD 600V 1A SMA
Diode 600 V 1A Surface Mount SMA
Powered by
EW
Response By EW AI
✅ Component type/application: This is a single rectifier diode and is suitable for flyback protection across a 12V relay coil.
✅ Diode type: Standard rectifier / general purpose rectifier (Technology: Standard).
✅ Average rectified current: 1A, which meets the ≥1A requirement and is well above the 80 mA relay coil current.
✅ Repetitive reverse voltage: 600V, which exceeds the ≥40V requirement.
✅ Package: SMA (DO-214AC, SMA), matches the required SMA package.
✅ Mounting type: Surface Mount, matches requirement.
✅ Operating temperature range: -65°C to +150°C junction, which is wider than the required -40°C to +125°C.
✅ RoHS compliance: Yes, listed as ROHS3 Compliant.
All required specifications are satisfied. This diode is approved for the relay flyback protection application.
✅ Diode type: Standard rectifier / general purpose rectifier (Technology: Standard).
✅ Average rectified current: 1A, which meets the ≥1A requirement and is well above the 80 mA relay coil current.
✅ Repetitive reverse voltage: 600V, which exceeds the ≥40V requirement.
✅ Package: SMA (DO-214AC, SMA), matches the required SMA package.
✅ Mounting type: Surface Mount, matches requirement.
✅ Operating temperature range: -65°C to +150°C junction, which is wider than the required -40°C to +125°C.
✅ RoHS compliance: Yes, listed as ROHS3 Compliant.
All required specifications are satisfied. This diode is approved for the relay flyback protection application.
Was this helpful?
Upvote
Downvote