88. Parallel-In Serial-Out Register

How do you plan to solve it?

module piso4 (
    input        CLK,
    input        RST,
    input        LOAD,
    input  [3:0] D,
    output reg   serial_out
);
    // Write your code here
    reg [3:0] shift_reg;

    always @(posedge CLK or posedge RST) begin
        if (RST) begin
            shift_reg  <= 4'b0000;
            serial_out <= 1'b0;
        end else if (LOAD) begin
            shift_reg  <= D;
            serial_out <= serial_out;           // hold output on load edge
        end else begin
            serial_out <= shift_reg[0];         // emit LSB
            shift_reg  <= {1'b0, shift_reg[3:1]};
        end
    end
    
endmodule