88. Parallel-In Serial-Out Register

module piso4 (
    input        CLK,
    input        RST,
    input        LOAD,
    input  [3:0] D,
    output reg   serial_out
);
    // Write your code here
    reg [3:0] SR;
    always @(posedge CLK or posedge RST) begin
        if(RST) begin
            serial_out <= 1'b0;
            SR <= 4'b0000;
        end
        else begin
            if(LOAD) begin
                SR <= D;
            end
            else begin
                serial_out <= SR[0];
                SR <= {1'b0, SR[3:1]};
            end
        end
    end
endmodule